TH11 operates at 230VAC, TH21 is designed for 120VAC applications
CODE: TH11 and TH21 Series
Searching for a U.S. distributor? Please contact the Sensata Technologies European sales person in the Netherlands for this item.
Sensata Technologies has developed the electrical self-hold temperature cut-out in order to offer a non-self-resetting device suitable for high current applications, thus fulfilling the growing need for higher safety.
One ceramic pin has a layer of resistive material, functioning as a small heater when a voltage is supplied.
The operating principle of the TH series simple and effective. A current flows through the resistive Klixon bimetal disc. When
a fault condition occurs, the increased ambient temperature causes the bimetal disc to snap open the contacts. The resistive layer spots the voltage over the open contacts and a current flows through the resistor, generating sufficient heat to keep the contacts open. When the power is switched off, the device cools down to a safe temperature and the contacts will close.
Riveting, soldering, spot welding, spring loaded contacting
Temperature limits of the switchhead
200°C
PTI of insulation materials
PTI 250
Method of mounting
By various means in conjunction with (holes in) terminals, such that adequate
creepage and clearance distances are maintained between live parts and accessible metal parts
Operating time
For continuous operation
Type of action
Type 2C
Reset characteristic
Voltage maintained off-position through heat from the heater film on one ceramic pin. Device resets by interrupting the power supply