|
|
|
|
Resin motors |
|
Pump motors |
|
Fan motors |
|
Small motors |
|
|
|
|
|
|
Sensata > Products > Klixon Brand > Motor Controls >
Klixon® BRL series thermal motor protector
Plastic case
Features and Overview |
/\ Top |
|
|
Snap–action Klixon disc: field proven, reliable and repeatable snap–action bimetal actuation |
|
ENEC, CQC, UL approvals |
|
Plastic case means no insulation needed from metal motor parts |
|
Sealed to withstand varnish dipping; can be mounted directly on windings to sense actual winding temperature |
|
120VAC and 230VAC |
|
|
|
|
|
CODE: BRL series
|
|
Sensata Technologies builds the BRL motor protector to meet almost any requirement of protection in a wide range of small motors.
Operating Principle - The BRL series uses the same snap–action principle of other Klixon protectors. The bimetal disc senses both heat and current. A current flows through the resistive Klixon bimetal disc. When the temperature of the disc reaches a predetermined calibration point the disc snaps open the contact, breaking the current path. The contacts close again automatically as the device cools down to a safe running temperature.
|
Performance Characteristics |
/\ Top |
|
Standard Operating Temperature Range |
65°C to 150°C in increments of 5K |
Tolerance on Open Temperature |
±5K |
Maximum contact rating |
For BRL1D: 8A / 115Vac, 6A / 250Vac |
Operating time |
Continuous |
Extend of sensing element |
Whole control |
PTI of insulation |
175 |
Protection degree |
IP00 |
Control pollution situation |
PD2 |
|
UL |
File number E15962 |
UL2111 motor protecting device |
ENEC |
File number 2089558.01 |
EN60730-2-2 thermal motor protector
|
File number 2089558.01 |
EN60730-2-3 thermal ballast protector |
CQC |
File number 05002012946 |
GB14536.1-1998 motor protector |
File number 05002012946 |
GB14536.3-1996 motor protector |
|