The 15AM is built to meet almost any application in the appliance motor protection field. In the 15AM design, the nickel-plated shell holds and protects the inner components against varnish penetration and mechanical forces. The heart of the device is the calibrated Klixon bimetal disc, responding to current and temperature changes. It is supported by a slug and a contact welded on the disc. The fixed contact is placed on the opposite nickel-zinc coated plated steel shell, separated by a coated gasket for insulation and sealing. The 15AM can be supplied as a basic device with leads and other integrated quick connectors or automated connection systems. Customized lead configurations are available on request. The 15AM can be fitted in the best possible mounting location in combination with the optimum assembly operation. As the 15AM is a metal device it may be necessary to insulate it from other conductive parts. An insulating sleeve is available on request.

The operating principle of the 15AM is both simple and effective. A current flows through the resistive Klixon bimetal disc. When a fault condition occurs, the increased current and shell temperature heats up the bimetal disc which snaps and opens the contacts. The contacts close again automatically as the device cools down to a safe running temperature.

The 15AM is designed to provide locked rotor and overload protection in a wide variety of motors for industrial and domestic appliances. Sensata Technologies can build the 15AM motor protector to meet almost any application in these fields. It is a proven leader in the European AC motor protection market.

125VAC / 250VAC

23.3 x 10.5 x 5.1 mm (including terminals)

5–30 A (at 10 s trip–time)

>3 seconds or >5 seconds (depending on bimetal type)

A type: Standard
B type: Improved sealing (hotmelt)

10.000 cycles / 13 (5) A 250 Vac / 10.000 cycles (see datasheet)

Open Temperature: 65°C to 170°C in increments of 5°C

Standard Operating Temperature: 65°C to 170°C

Tolerance: ±5K

Differential between open and close temperatures: 25K–45K (depends on open temperature)

Maximum Ambient Temperature: 180°C

Maximum Terminal Temperature: 185°C

Continuous: Open temperature +20°C

Overshoot: 5 minutes at 200°C

Military standard 202E/204C, category D (20g peak)

14 days according to IEC 60730-1, §22

-40°C to +190°C, 10 cycles according to IEC 68-2-14, test Na

13(5)Amp 10.000 cycles

Rating depends on the application and its test results

File number 2014531.04

EN60730-2-9 thermal cut–out
EN60730-2-2 thermal motor protector

File number E15962

UL2111

File number E15962

CSA C22.2 No. 77

Thermal cut–out

Incorporated, non–electronic

IP00

For internal conductors only

180°C

PTI 175

Inserting, clamping, bracketing or the like

For continuous operation

Type 2C (T - open)
Type 1C (T - close)

Automatic

Whole control

Degree 2

Thermal motor protector

PTI 175

Inserting, clamping, bracketing or the like

Type 3C

Automatic

Degree 2