|
|
Klixon 6TC Series |
|
Aircraft Circuit Breakers |
– |
|
|
– |
|
|
|
|
|
|
|
|
About these pages
Sensata Technologies is in the process of updating our web pages. Please bear with us during this process. If you have questions or comments, we’d like to hear from you. Please see contact us.
|
|
Amp Rating |
Max. Voltage Drop* |
2 |
0.70 |
2½ |
0.50 |
3 |
0.40 |
4 |
0.37 |
5 |
0.35 |
7½ |
0.192 |
10 |
0.176 |
15 |
0.176 |
20 |
0.176 |
* Maximum voltage drop at nominal rated current. |
|
|
|
|
Sensata > Products > Klixon Brand > Circuit Breakers > Aircraft >
Klixon® 6TC series
2 to 20 amp, 3–phase, miniature, ambient compensated
Features and Overview |
/\ Top |
|
|
Miniature size |
|
Light weight |
|
Trip–free design |
|
MIL-C-5809 qualified |
|
Current rating: 2 to 20 amps |
|
High vibration resistance |
|
High interrupting capacity |
|
Protective terminal barriers between each phase |
|
|
|
Vibration pads improve mounting stability |
|
One phase trips all |
|
Options include: longer push buttons, dust boot (part #14500-1 fits 15/32 bushing, part #14500-5 fits 7/16 bushing) |
|
Typical use: Military and commercial aircraft |
|
|
|
|
|
|
Klixon 6TC series circuit breakers provide ambient compensated circuit protection in a lightweight, miniature package size. The three–phase integrally linked design provides overcurrent protection in the event of simultaneous or unbalanced overloads, including short circuit conditions.
Coordination
The 6TC series is compatible with the single–phase 2TC and 3TC. The 6TC is available in ratings from 2 to 20 amps, with military and various commercial approvals on most styles.
Ambient Temperature Compensation
The 6TC serves as an ambient compensated circuit breaker. This permits system designers to specify smaller gauge wire where the circuit breaker and wiring are exposed to different ambient temperatures.
Trip–Free
The complete line of TC series circuit breakers is trip–free. The circuit breaker cannot be maintained closed during an overload even with the actuator button held closed.
High Short Circuit Capacity
For its miniature size, the 6TC series offers unusually high current interrupting capacity. Overloads up to 2,000 amps at 120 VAC, 400 Hz can be safely interrupted without affecting calibration or operating performance in the standard 6TC.
|
Performance Characteristics |
/\ Top |
|
Vibration |
10G minimum, 50–500 Hz (other vibration levels available) |
Mechanical Shock |
50G |
Acceleration |
10G |
Weight |
65 gram maximum (6TC14) |
Interrupt Current |
2–20 amps: 2,000 amps at 120 VAC, 400 Hz
|
Endurance |
2,500 cycles: 120 VAC, 400 Hz inductive
5,000 cycles: 120 VAC, 400 Hz resistive
5,000 cycles: Mechanical, no load |
Ambient Temperature Compensation |
-54°C to 121°C Especially suited for applications where ambient temperature exceeds the 71°C (160°F) maximum of non–ambient compensated thermal circuit breakers. However, care should be taken to understand the specification limits at elevated ambient temperatures. |
|
European |
European Standards Most European Aircraft OEMs |
Mil–spec |
MS 14154 (our 6TC2 device) MS 14154L (our 6TC37 device) MS 14154V (our 6TC63 device) |
USA |
All U.S. Aircraft OEMs |
To view qualifications on all Klixon aircraft circuit breakers, see the cross reference chart. |
Calibration Chart For a Standard Device |
/\ Top |
|
Temp. |
Minimum Ultimate Trip |
Maximum Ultimate Trip |
Trip Time in seconds |
200% |
500% |
1000% |
25°C |
110% |
145% |
4-20 |
0.40-2.00 |
0.10-0.53 |
-54°C |
110% |
165% |
6-40 |
0.55-3.50 |
0.15-0.80 |
71°C |
100% |
145% |
3-20 |
0.33-1.70 |
0.08-0.40 |
For others, please contact us. Single–phase maximum ultimate trip values apply with other two phases carrying 100% of rated current. |
Drawings and Dimensions For Reference Only |
/\ Top |
|
|
Spec Sheets For Our Most Popular Devices |
/\ Top |
|
Specification sheets contain detailed drawings, amp ratings, characteristics, and more... |
6TCX |
Device Type |
Spec Sheet |
6TC2 |
- - - |
|
6TC14 |
- - - |
|
6TC37 |
- - - |
|
6TC63 |
- - - |
|
For others, please contact us. |
|