|
|
Klixon PS80 Series |
|
Contact |
|
|
|
|
|
|
|
Sensata > Products > Klixon Brand > Switches > For HVAC/R + Industrial >
Klixon® PS80-2X series CO2 pressure switches
For use in R744/CO2 operated systems
Features and Overview |
/\ Top |
|
|
Hermetically sealed |
|
Environmentally sealed leads |
|
Releable over broad pressure and temperature ranges |
|
Factory calibrated settings |
|
Single–pole, single–throw switch; normally open or closed contacts |
|
Proven reliability |
|
|
|
|
|
|
|
CODE: PS80-2X series |
|
Leading the world in switch design. The PS80-2X is an automatic reset pressure switch designed to meet the unique challenges of R744/COs-based air conditioning and refrigeration equipment. These green systems require robust switches capable of withstanding the increased pressures and temperatures generated by these units. Sensata has redesigned the flagship PS80 to meet the special requirements of these transcritical R744 systems
Sensata Technologies has been a leading global supplier of pressure sensors and switches for over 50 years.
|
|
CO2 air conditioning |
|
CO2 refrigeration |
|
CO2 heat pump |
|
High- and low-pressure safety cut-out |
Performance Characteristics |
/\ Top |
|
Ambient Temperature |
UL Rating: -20°F to 176°F (-29°C to 80°C) |
Fluid Temperature |
UL Rating: -65°F to 275°F (-54°C to 135°C) |
Operating Pressure |
Maximum: 2,300 psig, 160 bar, 16.0 MPa |
Burst Pressure |
6,100 psig, 420 bar, 42.0 MPa |
Life at Rated Current |
100,000 cycles |
Electrical Ratings |
120 / 240 VAC - 6.0 FLA 36 LRA
120 / 277 VAC - 375 VA Pilot Dut
24 VAC - 125 VA Pilot Duty
Gold contacts available |
|