 |
|
See Also |
|
|
Part Numbers
10AT313-xy-z
|
Where 10AT313 is the basic switch type (alternately, could be AT47, AT64, 10AT313, et cetera)
|
and x is the contact form: |
x |
Contact Form |
0 |
SPDT |
1 |
SPST normally closed |
2 |
SPST normally open |
3 |
DPDT |
4 |
DPDT normally closed |
5 |
DPDT normally open |
6 |
DPDT normally closed, normally open |
|
and y is the type of termination as shown in dimensional drawing
|
and z is the lead length in increments of 6 inches: |
z |
Lead Length |
1 |
6" |
2 |
12" |
3 |
18" |
4 |
24" |
5 |
30" |
6 |
36" |
7 |
42" |
8 |
48" |
9 |
60" |
10 |
72" |
|
| |
Part Number Example
10AT313-03-6
means a 10AT313 switch with SPDT, with certain type of terminal, 36" lead length.
|
|
|
|
|
|
Sensata > Products > Klixon Brand > Switches > Military + Aerospace >
Klixon® AT One-Pole and Two-Pole Side Plate Package Designs
| • |
Available in a wide variety of packaging styles |
| • |
Packaging options are available for one, two, or multiple poles |
| • |
Custom packaging is available to suit your needs, whatever they may be |
Listed below is information about three popular devices in this category. Please scroll down.
|
|
|
|
|
|
Typical One and Two Pole Side Plate Package Designs |
AT355
10AT313 |
  |
Typical Actuation Characteristics |
Maximum Actuating Force (STP) |
24 oz. |
Leads can be configured to exit a side plate package in any direction. Contact Sensata Technologies for configurations other than those shown.
|
Minimum Release Force (STP) |
4 oz. |
Plunger Seal |
- - - |
Maximum Pretravel |
.040 inch |
Maximum Movement Differential |
.030 inch |
Minimum Overtravel |
.125 inch |
Positive Overtravel Stop |
No |
Maximum Force on Actuator |
10 lb. |
|
AT357
10AT315 |
  |
Typical Actuation Characteristics |
Maximum Actuating Force (STP) |
24 oz. |
Leads can be configured to exit a side plate package in any direction. Contact Sensata Technologies for configurations other than those shown.
|
Minimum Release Force (STP) |
4 oz. |
Plunger Seal |
- - - |
Maximum Pretravel |
.040 inch |
Maximum Movement Differential |
.030 inch |
Minimum Overtravel |
.125 inch |
Positive Overtravel Stop |
No |
Maximum Force on Actuator |
10 lb. |
|
AT356
10AT314 |
  |
Typical Actuation Characteristics |
Maximum Actuating Force (STP) |
48 oz. |
Leads can be configured to exit a side plate package in any direction. Contact Sensata Technologies for configurations other than those shown.
|
Minimum Release Force (STP) |
4 oz. |
Plunger Seal |
- - - |
Maximum Pretravel |
.040 inch |
Maximum Movement Differential |
.040 inch |
Minimum Overtravel |
.125 inch |
Positive Overtravel Stop |
No |
Maximum Force on Actuator |
10 lb. |
|
|
